News

Release time:2023-09-09　　

For the switch controller switch controller connected by the commissioning main pipe of the pelletizer, the power indicator light should be adjusted at the interval of about 20 seconds and 0.1 seconds. Then the sound of adjusting the width can be heard that the pelletizer fan is on, which indicates that the control is normal. If no sound can be heard, please check whether the connection is electromagnetic or the controller is damaged. When debugging, turn off the controller and test it is normal.

Check the power supply of the pelletizer fan and see that the working direction of the pelletizer fan is correct. Touch the motor to check for overheating. If not, turn off the pelletizer fan after ten minutes;

Check if the working range of the air compressor adjustment is between 0.5 and 0.7 MPa, and if the fan of the tube cutter is leaking. When the pressure increases to 0.7 MPa, the air compressor can automatically shut down;

Normal operation:

Having excellent dust removal effect and normal injection device;

The normal operation of the cutter fan allows the package to be blown round with compressed air;

The cutter controller can accurately display the working status of the cutter signal indication.